Monday, September 29, 2014

Stealth Suits

I meant to do this post, yesterday but ran out of time. I finished off the last 6 stealth suits, painted more of the devilfish and did some work on shadowsun.  Here is a pic of all the stealth suits together. That's 4 fusion and 8 reg guys.

So that is:
Sep: 6 points
YTD total:  242  points

Models painted: 719 models

More as I get it done.
aruki

Wednesday, September 24, 2014

Review: T.J.H. Models asteroids

So awhile ago I backed this kickstarter. Here are what they look like.





They are good quality rock and I love the color. I do wish they were a bit bigger but not the end of the wold. They will work well for x wing, not sure how well they will work for FSA. They may actually be just the write size to give a bit of scale to the ships. I will figure it out when I get around to doing new group pics of stuff.  Delivery was cheap and fast, the only down size I have found is I need to varnish them. But as different people have different tastes when it comes to this it was a smart idea. The stands are normal fare and the places to glue them in are solidly glued. Overall I am quite satisfied with this purchase and wish I had gotten more.
aruki

Monday, September 22, 2014

Biostrip 20: review 3/3

Today, will be the final part in this review series For the first two parts follow the links below.
Part 1
Part 2
front

backs
The subjects of todays experiment are 3 dreadnoughts I got. I wanted to test Biostrip 20 on a larger surface area and 1 of the models appeared to have had a non standard spray paint used on it, in fact it seems like a latex paint. So was a good chance  The one in white on the left was the one that I could tell had strange paint on him. I have found well testing on the minis that for normal acrylic paint the sweet spot for them seems to be in the 5 to 10 minute range. Due to the nature of the paint on the one on the left (with the white paint. I did him first but only let the Biostrip sit for a minute or so. The other two where in the 5 to 10 min range.


first round of striping front

first round of striping backs
 One round was enough for the other two dreadnoughts, there was a little leftover paint in areas that where hard to reach with the tooth brush and where the paint had been covered or mixed with super glue. But a little clean up work was all that was needed.

The picturess below are after the first model was done again with a 10min time. It came out mostly good. The gold paint you see on the front is strange and will need more time, no idea what it was but it turns into more of a soup, the same with the black paint that is in many places still on the model. As a side note this dreadnought appears to have been based with something strange,



Not sure how well you can see the black that is left it is mainly on the feet and under the main body. Will give those parts and the gold on the front 1 more soak and scrub.

Overall, I still recommend this product, the two dreads with acrylics cleaned up really fast and the stuff obviously works on non standard paints that people use.

aruki 

Saturday, September 20, 2014

Painting table Saturday #23

I didn't finish much up the past couple of weeks model wise besides striping the new marines and the dreadnoughts. I did get a little more paint on one of the devil fish though.








You can expect the last biostrip review on Monday and a review of what I received from one of my kickstarters later this coming up week. I also plan on reviewing a rule set in the next couple of weeks. Other than that I am looking at picking up a few arms for my dreadnoughts and exploring options for shields so I can really start cracking on the SM project around the end of the year.

Aruki

Tuesday, September 9, 2014

Biostrip 20 review part 2 of 3



Overall, I recommend this product. I have had zero probelms with melting or bending or any of the stuff you often run into with other methods. I have also found it has very little dyeing effect on plastics. A few key things before the pictures and such, 1 key thing I have found is make sure you cover every piece you can get to. I missed some parts on other guys I was working on and had to go back to do it again. All of these models had been painted multiple times. It turns out the sarge with the banner pole had been painted about 5 times in total. Red, blue, yellow then red and then black. All the others varied from 1-4 times.


The 3 subjects

backs

after 1 hour and a quick scrub off and wash

Backs

after another 30min and scrub

Backs
 Overall they came out well and the little parts that are left on the two normal guys are acceptable to hand pick out. The sarge will probably need another dip the red paint that seems to be left is thicker than the other stuff and not normal acrylic.  Below I thought I would show something interesting. This subject was painted same as above ones. The main difference was that as I was applying the Biostrip 20, I decided to start cleaning him since I had notice that paint started coming off almost immediately.
This was the result with it being in contact for less than 1 minute before I started scrubbing and then washed off.

I found with the future models that If I did this quick scrub and then did an hour long session it worked even better than just letting them sit for 2 rounds.
This product I definitely endorse for any plastics or metals you have to strip. It works great and stores easily. There has been no stench from the cleaner left on the models or in the air while they were sitting with the stuff on them. So give it a shot. I have yet to test it on resin but will as soon as I have a chance. Since I have a few dreadnaughts coming in that will need paint stripped I figured I would do a third review of Biostrip 20 after this one. So look forward to it in the future.

Aruki

Saturday, September 6, 2014

Update and August round up

The update is short and sweet. I have done nothing. This last few days have been rather busy and so will this weekend into next week. Here is South Korea it is a major 3 day holiday called Chuseok. Suffice to say lots of cooking, cleaning, people etc, to deal with. I did receive my marines that I got dirt cheap and hope to take a crack at testing the paint stripper properly now that I have painted models that need to be stripped. So look forward to the final review of Biostrip 20.

As for August it was a pretty good month for painting. For epic I completed the 3 detachments for the 5th company, the 8th company and the 10th company. I also completed 6 stealth suits for the tau. Now this month was good compared to past months but still not as good as I want, especially on the 28mm side. Unfortunately life just hasn't been co-operating enough and I really want to succeed in my goal of finishing off the epic SM chapter. Which honestly there isn't much left of.

Now a quick look at all the points and such.

Points:
Aug: 58.50
YTD: 236

Models painted:
Aug: 209 models
YTD; 713 models

Spending:
Aug: -$30.00
Ytd: -$285.08

I have also bought a few new things this past week, namely two dreadnaughts, which will go into the siege list once stripped painted and properly armed. Though I still need 1 more cheap one to fill out the unit.  Which will be added to Septembers spending.
So:
Sep: -$30.00
YTD: -$315.08

I finally also sat down and figured out actual painted points for most of the models, the heavy gun drones I need to look up again and the titans for epic don't include their weapon load outs and that doesn't include the huge ass titan I got..

Points painted:
DWs: 365points
40K: 659+points
Ancients: points
DZC: points
FSA: 650 points
Epic: 8075+points
Total: 9749+points

Suffice to say though that I smashed my actual points goal for the year.

Anyway more as I can get it done.

Aruki